Welcome to Shandong Junzheng Chemical Technology Co., Ltd.
Products
Navigation
Send Us A Message
Iron Molybdenum 55
Specification and particle size: natural lump, 10-100mm, powder or customised according to customers' requirements.
Packing: one metric tonne in a big bag, or according to customer's requirement
Chemical Content TableProduct Packaging
Introduction to FeMo
FeMo is an iron alloy consisting of molybdenum and iron, generally containing 50-60% molybdenum, and is used as an alloying additive in steelmaking. Ferro Molybdenum is an alloy of molybdenum and iron. Its main use is as a molybdenum additive in steelmaking. Adding molybdenum to steel gives it a uniform fine grain organisation, improves its hardenability, helps eliminate temper brittleness, and alloys with special physical properties. Adding molybdenum to cast iron improves its strength and wear resistance.
Introduction to Ferromolybdenum 55
Iron alloy with molybdenum and iron as main components. It is used as an alloying agent in steelmaking and cast iron. According to the molybdenum content is divided into 70%, 60% and 55% and so on 3 grades, the impurity of other provisions. Molybdenum oxide has also replaced part of the ferromolybdenum as an alloying agent. In addition, molybdenum-aluminium, molybdenum-vanadium-aluminium, molybdenum-nickel and other intermediate alloys are used as alloying agents for titanium alloys, nickel-based high-temperature alloys and aluminium alloys.
Specification and particle size: natural lump, 10-100mm, powder or according to customer's requirement.
Packing: one metric tonne in a big bag or according to customer's requirement
Uses of Ferromolybdenum 55
The greatest application of Ferro Molybdenum is in the production of ferro alloys depending on the molybdenum content and range, which are used in machine tools and equipment, military equipment, refinery tubing, load bearing parts and rotating manoeuvres. Ferro Molybdenum is also used in cars, trucks, locomotives and ships. In addition, ferro-molybdenum is used in stainless and heat-resistant steels that are employed by synthetic fuels and within chemical plants, heat exchangers, generators, refinery equipment, pumps, turbine tubes, ship propellers, plastics and acids, and storage containers. Tool steels with a high proportion of ferro-molybdenum range are used for high-speed machined parts, cold work tools, drills, screwdrivers, moulds, chisels, heavy castings, balls and mills, rolls, cylinder blocks, piston rings and large drill bits.
Delivery Time
Inventory 2-3 working days New manufacturing 7-10 working days
Mode of Transportation
1. By Air, fast but expensive.
2. By Sea, usual and economy.
3. By Train, suit for middle Asia countries.
4. By Express, suit for small package.
We only provide highest quality goods available, accompanied by after support!
Q1: Are Your Products Compliant With International Standards?
A1: Yes, our company holds a number of internationally recognized core certifications. All production and operation activities strictly follow international environmental, safety and quality standards, and each batch of products is accompanied by a compliance test report to meet the chemical industry requirements in different regions around the world.
Q2: Do You Provide Customized Product Services?
A2: Yes, we have a professional R&D team and refined production capacity. We can customize chemical products of different specifications and performances according to customers' specific needs, and provide full-process technical support to meet the personalized application needs of downstream industries.
Q3: What Is The Approximate Delivery Cycle Of The Products?
A3: The delivery cycle varies according to product type, order quantity and destination. We have a complete global supply chain system to ensure fast and safe delivery of goods. For specific cycle, you can consult our sales team for detailed information.
Q4: How To Obtain Product Samples?
A4: You can contact our customer service or sales team to specify the specific model and specification of the required samples. We will provide free samples according to the actual situation, and the sample express fee can be negotiated.
![Ferrosilicon 75]( "Ferrosilicon 75")
Ferrosilicon 75Ferrosilicon is an iron alloy composed of iron and silicon. Ferrosilicon is an iron silicon alloy made by melting coke, scrap steel, quartz (or silica) as raw materials in an electric furnace. The manufacturer provides four grades of ferrosilicon, 75 # 72 # 70 # 65 #. The price of ferrosilicon is favorable, and the processing granularity includes natural blocks, standard blocks, particles, powders, etc. Can be provided according to customer requirements.![Ferrosilicon 70]( "Ferrosilicon 70")
Ferrosilicon 70Ferro Titanium, an intermediate alloy of titanium and iron, is used as a purifying agent for steel. Production process: Ferro-titanium is an alloy of titanium and iron. The process of producing ferrotitanium usually involves mixing titanium and iron feedstocks and reacting them at high temperatures. Specification and particle size: natural lump, 10-100mm, powder or customised according to customers' requirements. Packing: one metric tonne in a big bag, or according to customer's requirement.![Ferrosilicon 65]( "Ferrosilicon 65")
Ferrosilicon 65Silicon iron 65 has always been one of the metallurgical materials purchased by metallurgical material manufacturers. The price of silicon iron 65 is slightly lower than that of silicon iron 75 72, but the silicon content is much better than that of low silicon iron. The national standard silicon iron content is better, and the effect in the metallurgical process is also more obvious. At the same time, the smelting cost is greatly reduced. Therefore, the national standard silicon iron 65 is very popular among metallurgical manufacturers! Specification and particle size: natural lump, 10-100mm, powder or customised according to customers' requirements. Packing: one metric tonne in a big bag, or according to customer's requirement.![Silicon-manganese Alloy 6517]( "Silicon-manganese Alloy 6517")
Silicon-manganese Alloy 6517Silicon manganese alloy is an alloy composed of manganese, silicon, iron, and a small amount of carbon and other elements. It is a widely used and high-yield ferroalloy. Silicon manganese alloy is a commonly used composite deoxidizer in steelmaking, and also a reducing agent for low-carbon manganese iron and electro silicothermic production of metallic manganese in production. Specification and particle size: natural lump, 10-100mm, powder or customised according to customers' requirements. Packing: one metric tonne in a big bag, or according to customer's requirement![Silicon-manganese Alloy 6818]( "Silicon-manganese Alloy 6818")
Silicon-manganese Alloy 6818Introduction to Basic Knowledge of Silicon Manganese Alloy Introduction to Basic Knowledge of Silicon Manganese Alloy 1. Concept: Silicon manganese alloy is an alloy composed of manganese, silicon, iron, and a small amount of carbon and other elements. It is a widely used and high-yield iron alloy. Silicon manganese alloy is a commonly used composite deoxidizer in steelmaking, and also a reducing agent for low-carbon manganese iron and electro silicon thermal production of metallic manganese in production. Specification and particle size: natural lump, 10-100mm, powder or customised according to customers' requirements. Packing: one metric tonne in a big bag, or according to customer's requirement![Silicon-manganese Alloy 6014]( "Silicon-manganese Alloy 6014")
Silicon-manganese Alloy 6014Introduction to Silicon Manganese Silicon manganese alloy is an alloy composed of manganese, silicon, iron, and a small amount of carbon and other elements. It is a widely used and high-yield ferroalloy. Silicon manganese alloy is a commonly used composite deoxidizer in steelmaking, and also a reducing agent for low-carbon manganese iron and electro silicothermic production of metallic manganese in production. Specification and particle size: natural lump, 10-100mm, powder or customised according to customers' requirements. Packing: one metric tonne in a big bag, or according to customer's requirement![Silicon-manganese Alloy]( "Silicon-manganese Alloy")
Silicon-manganese AlloyIntroduction to Silicon Manganese Silicon manganese alloy is an alloy composed of manganese, silicon, iron, and a small amount of carbon and other elements. It is a widely used and high-yield ferroalloy. Silicon manganese alloy is a commonly used composite deoxidizer in steelmaking, and also a reducing agent for low-carbon manganese iron and electro silicothermic production of metallic manganese in production. Specification and particle size: natural lump, 10-100mm, powder or customised according to customers' requirements. Packing: one metric tonne in a big bag, or according to customer's requirement![Low-carbon Ferromanganese]( "Low-carbon Ferromanganese")
Low-carbon FerromanganeseQuality Assurance
Delivery Time: Fast delivery within 3-7 days.
Samples: Free samples are available.
We offer ferromanganese grades for selection. First order discount, contact us now.
Specification and particle size: natural lump, 10-100mm, powder or customised according to customers' requirements.
Packing: one metric tonne in a big bag, or according to customer's requirement
