Welcome to Shandong Junzheng Chemical Technology Co., Ltd.
Products
Navigation
Send Us A Message
Silicon Metal
Specification and particle size: natural lump, 10-100mm, powder or customised according to customers' requirements.
Packing: one metric tonne in a big bag, or according to customer's requirement
Chemical Content TableProduct Packaging
Introduction to Silicon Metal
Silicon metal, also known as industrial silicon and crystalline silicon, is obtained by reducing silicon dioxide with a carbonaceous reductant in a mineral furnace, and is an important raw material for the production of silicone, polysilicon and aluminium alloys. Silicon metal is silicon dioxide, carbonaceous reductant and loose agent as raw materials, in the mineral furnace through continuous electrothermal chemical reaction production. In the smelting production process, the material required for production is firstly sent to the silo in the ore furnace workshop by the raw material handling system, and then, according to the specific gravity of the material, it is transported by the conveying equipment to the top silo or the storage silo on the operating platform in the ore furnace workshop, and the charge is added to the furnace by the furnace operator.
Introduction to High Purity Silicon Metal
High purity silicon metal has a higher content of silicon than ordinary silicon metal, usually above 99.9, up to 99.99. The surface of high purity silicon metal is distinctly different from that of silicon metal, and is brighter and smoother than ordinary silicon metal.
Specification and particle size: natural lump, 10-100mm, powder or according to customer's requirement.
Packing: one metric tonne in a big bag or according to customer's requirement
Uses of High Purity Silicon Metal
The main use of silicon metal is as an additive to non-ferrous based alloys. It is also used as an alloying agent for silicon steel with strict requirements, and as a deoxidising agent for smelting special steel grades and non-ferrous base alloys. After a series of processes, silicon metal can be drawn into monocrystalline silicon for use in the electronics industry.
Delivery Time
Inventory 2-3 working days New manufacturing 7-10 working days
Mode of Transportation
1. By Air, fast but expensive.
2. By Sea, usual and economy.
3. By Train, suit for middle Asia countries.
4. By Express, suit for small package.
We only provide highest quality goods available, accompanied by after support!
Q1: Are Your Products Compliant With International Standards?
A1: Yes, our company holds a number of internationally recognized core certifications. All production and operation activities strictly follow international environmental, safety and quality standards, and each batch of products is accompanied by a compliance test report to meet the chemical industry requirements in different regions around the world.
Q2: Do You Provide Customized Product Services?
A2: Yes, we have a professional R&D team and refined production capacity. We can customize chemical products of different specifications and performances according to customers' specific needs, and provide full-process technical support to meet the personalized application needs of downstream industries.
Q3: What Is The Approximate Delivery Cycle Of The Products?
A3: The delivery cycle varies according to product type, order quantity and destination. We have a complete global supply chain system to ensure fast and safe delivery of goods. For specific cycle, you can consult our sales team for detailed information.
Q4: How To Obtain Product Samples?
A4: You can contact our customer service or sales team to specify the specific model and specification of the required samples. We will provide free samples according to the actual situation, and the sample express fee can be negotiated.
![Ferrosilicon 75]( "Ferrosilicon 75")
Ferrosilicon 75Ferrosilicon is an iron alloy composed of iron and silicon. Ferrosilicon is an iron silicon alloy made by melting coke, scrap steel, quartz (or silica) as raw materials in an electric furnace. The manufacturer provides four grades of ferrosilicon, 75 # 72 # 70 # 65 #. The price of ferrosilicon is favorable, and the processing granularity includes natural blocks, standard blocks, particles, powders, etc. Can be provided according to customer requirements.![Ferrosilicon 70]( "Ferrosilicon 70")
Ferrosilicon 70Ferro Titanium, an intermediate alloy of titanium and iron, is used as a purifying agent for steel. Production process: Ferro-titanium is an alloy of titanium and iron. The process of producing ferrotitanium usually involves mixing titanium and iron feedstocks and reacting them at high temperatures. Specification and particle size: natural lump, 10-100mm, powder or customised according to customers' requirements. Packing: one metric tonne in a big bag, or according to customer's requirement.![Ferrosilicon 65]( "Ferrosilicon 65")
Ferrosilicon 65Silicon iron 65 has always been one of the metallurgical materials purchased by metallurgical material manufacturers. The price of silicon iron 65 is slightly lower than that of silicon iron 75 72, but the silicon content is much better than that of low silicon iron. The national standard silicon iron content is better, and the effect in the metallurgical process is also more obvious. At the same time, the smelting cost is greatly reduced. Therefore, the national standard silicon iron 65 is very popular among metallurgical manufacturers! Specification and particle size: natural lump, 10-100mm, powder or customised according to customers' requirements. Packing: one metric tonne in a big bag, or according to customer's requirement.![Silicon-manganese Alloy 6517]( "Silicon-manganese Alloy 6517")
Silicon-manganese Alloy 6517Silicon manganese alloy is an alloy composed of manganese, silicon, iron, and a small amount of carbon and other elements. It is a widely used and high-yield ferroalloy. Silicon manganese alloy is a commonly used composite deoxidizer in steelmaking, and also a reducing agent for low-carbon manganese iron and electro silicothermic production of metallic manganese in production. Specification and particle size: natural lump, 10-100mm, powder or customised according to customers' requirements. Packing: one metric tonne in a big bag, or according to customer's requirement![Silicon-manganese Alloy 6818]( "Silicon-manganese Alloy 6818")
Silicon-manganese Alloy 6818Introduction to Basic Knowledge of Silicon Manganese Alloy Introduction to Basic Knowledge of Silicon Manganese Alloy 1. Concept: Silicon manganese alloy is an alloy composed of manganese, silicon, iron, and a small amount of carbon and other elements. It is a widely used and high-yield iron alloy. Silicon manganese alloy is a commonly used composite deoxidizer in steelmaking, and also a reducing agent for low-carbon manganese iron and electro silicon thermal production of metallic manganese in production. Specification and particle size: natural lump, 10-100mm, powder or customised according to customers' requirements. Packing: one metric tonne in a big bag, or according to customer's requirement![Silicon-manganese Alloy 6014]( "Silicon-manganese Alloy 6014")
Silicon-manganese Alloy 6014Introduction to Silicon Manganese Silicon manganese alloy is an alloy composed of manganese, silicon, iron, and a small amount of carbon and other elements. It is a widely used and high-yield ferroalloy. Silicon manganese alloy is a commonly used composite deoxidizer in steelmaking, and also a reducing agent for low-carbon manganese iron and electro silicothermic production of metallic manganese in production. Specification and particle size: natural lump, 10-100mm, powder or customised according to customers' requirements. Packing: one metric tonne in a big bag, or according to customer's requirement![Silicon-manganese Alloy]( "Silicon-manganese Alloy")
Silicon-manganese AlloyIntroduction to Silicon Manganese Silicon manganese alloy is an alloy composed of manganese, silicon, iron, and a small amount of carbon and other elements. It is a widely used and high-yield ferroalloy. Silicon manganese alloy is a commonly used composite deoxidizer in steelmaking, and also a reducing agent for low-carbon manganese iron and electro silicothermic production of metallic manganese in production. Specification and particle size: natural lump, 10-100mm, powder or customised according to customers' requirements. Packing: one metric tonne in a big bag, or according to customer's requirement![Low-carbon Ferromanganese]( "Low-carbon Ferromanganese")
Low-carbon FerromanganeseQuality Assurance
Delivery Time: Fast delivery within 3-7 days.
Samples: Free samples are available.
We offer ferromanganese grades for selection. First order discount, contact us now.
Specification and particle size: natural lump, 10-100mm, powder or customised according to customers' requirements.
Packing: one metric tonne in a big bag, or according to customer's requirement
